Closing Bescor MP-101 Head

This is a follow up to the post where I opened up the Bescor PT head with intent of modifying it for operation with an external DIY controller.  And here is the development of this effort in pictures!
I used the components:  RJ45 breakout board and double-sided prototype PCB to replace the board electronics.  In short, I just connected PAN and TILT motors (see the referenced post on how to identify those) to RJ45 pins 4/5 and 3/6.  With a little encouragement from Mr.Dremmel the RJ45 connector is now protruding through the faceplate.

And here is a final product after reassembly.  Test it by applying 6V DC to pins 4/5 and 3/6.